PCB-30 DIY USB LED strip kit includes a flexible LED strip and USB cable with 3 buttons. This 5V LED strip kit is 5mm wide and has a 3M sticker on the backside.
DIY RGB LED strip kit has 15cm, 30cm, 50cm, and 80cm length options. It is ok to make custom-length LED strips from 10cm to 500cm. You can cut off each LED.
|Dimension:||LED Strip: 5mm(W)*15cm~100cm(L)
USB cable Length: 150cm (59 inches)
|LED Quantity:||60pcs LED each meter|
|Power Input:||DC 5V|
|Light Color:||7 Kinds of RGB lights|
|Output Power:||15cm (2.1W), 30cm (4.2W), 50cm (5~7W)|
- DC 5V USB powered
- 7 kinds of RGB lights, flashing RGB and fading RGB lights
- Flexible LED strip length from 15cm to 100cm
- 60pcs LED each meter
1 x 5V DIY USB LED Strip with USB Cable
HOW TO USE PCB-30 DIY USB LED STRIP?
- Connect to DC 5V power source (laptop, mobile power bank, USB power adapter, etc).
- Press the “Mode” button, the LED strip lights up. Below light color light up by turns.
Red, Green, Blue, Orange, Cyan, Purple, White, Slow Flashing Light Mode, Fading RGB Lights.
- The final light color is red and then press the Mode button to turn it off.
- Press “+” button to turn up the brightness (flash speed) and press “-” to turn down the brightness (flash speed).
CUSTOM MADE LED STRIP KIT:
Custom length LED strip
Custom LED strip type (light color, voltage: 5V or 12V, LED strip width: 3mm/4mm/5mm/6mm/8mm/10mm)
Optional 5V / 12V power adapter
If you have any questions or need a quotation, please chat with us online or leave us an offline message. We will reply to you asap.
Note: please leave the product model numbers, order quantity (or your shopping cart screenshot) to get an E-mail quotation including wholesale factory prices and real-time shipping cost.