PCB-100 DIY USB LED strip kit includes custom-length LED strip and one piece USB cable with 3 buttons. This 5V USB LED strip kit is 10mm wide and has a 3M sticker on the backside of the LED strip.
There are 15cm, 30cm and 50cm long led strip options. It is ok to make custom length LED strips below 80cm. You can cut each LED.
|Dimension:||LED Strip: 10mm(W)*15cm~100cm(L)
USB cable Length: 150cm (59″)
|LED Quantity:||60pcs LED each meter|
|Power Input:||DC 5V|
|Light Color:||7 Kinds of RGB lights|
|Output Power:||15cm (2.1W), 30cm (4.2W), 50cm (5~7W)|
- DC 5V USB Powered
- 7 RGB lights, flashing RGB and fading RGB lights
- Flexible LED strip length from 15cm to 100cm
- 60pcs LED each meter
- Buttons to set the brightness and flash speed
1 x DIY USB LED Strip with USB Cable
HOW TO USE DIY USB LED STRIP PCB-100?
- Connect to DC 5V power source (laptop, mobile power bank, USB power adapter, etc).
- Press the “Mode” button, the LED strip lights up. Below light color light up by turns.
Red, Green, Blue, Orange, Cyan, Purple, White, Slow Flashing Light Mode, Fading RGB Lights.
- The final light color is red and then press the Mode button to turn it off.
- Press “+” button to turn up brightness (flash speed) and press “-” to turn down the brightness (flash speed).
CUSTOM MADE DIY USB LED STRIP KIT:
Custom length DIY USB LED strip
Custom LED strip type (light color, voltage: 5V or 12V, LED strip width: 3mm/4mm/5mm/6mm/8mm/10mm)
Optional 5V / 12V power adapter
If you have any questions or need a quotation, please chat with us online or leave us an offline message. We will reply to you asap.
Note: please leave the product model numbers, order quantity (or your shopping cart screenshot) to get an E-mail quotation including wholesale factory prices and real-time shipping cost.