Tips to Cut Acrylic Plate for LED Lamp Base

Tips to cut acrylic plate for LED lamp base

Tips to cut acrylic plate for LED lamp base:

  1. Measure the acrylic thickness and make sure it fits the LED light base slot. Check the LED lamp base slot dimensions: depth, width, and length.
  2. Make sure there is some space (for example: 0.1~0.3mm) between the bottom of the acrylic plate and the LEDs. So the bottom of the acrylic plate does not press the LED strip or the LED board.
  3. For the inserted acrylic plate, make the top 1mm wider than the bottom of the acrylic plate. The small slope at both sides of the acrylic plate ensures the plate can be installed firmly inside the LED base slot even though the acrylic is a bit thinner than the slot width).
  4. Make a longer step for the main part of the acrylic plate. The acrylic plate will not fall into the slot and press the LED strip or the LED board directly.
  5. Use round corners when you cut the acrylic plate instead of sharp or rectangle angles.
  6. Ask the seller for a template file for the acrylic plate to save time. A well-made and tested acrylic plate file helps save time and avoid mistakes.
  7. Cut 1~2 pieces to test first, then start to cut the acrylic plate in bulk.
Tips to cut acrylic plate for LED lamp base

Leave a Reply

Your email address will not be published. Required fields are marked *