LED Solution for Edge Lit Acrylic Signs

XSTRON offers professional LED solutions for LED edge lit acrylic signs.

1. LED Edge Lit Sign with Blank Cast Acrylic Plate

We offer well-made LED edge-lit signs with blank plates. You can engrave or curve it directly. TDL-GS LED acrylic sign has extra remote control compared with TDL-G LED edge lit sign.

2. LED Edge Lit Light Bar – LED Sign Base

TDL-U edge-lit LED bar has a U channel and a hard LED strip at the bottom of the LED light bar. It fits for 1/8”~1/4” acrylic plate. It is plug-and-play and USB powered. The slim LED light bar includes a 190cm long USB cable with an on/off switch.

TDL-US is the upgraded LED edge lit light bar with 7 RGB lights. It is suitable for 1/8”~1/4” acrylic plates. There are many light modes to choose from with a mini LED controller.

RGB Lights Edge-lit Acrylic Sign Sample

with 30cm long TDL-US LED bar

Custom Length Big LED Acrylic Sign Sample

with 55cm long TDL-U LED bar

TDL-U6 is dual light color LED bar with a 6.35mm wide slot. It needs 2 pieces 3mm thick acrylic plates.

Blue and Red Light Color Edge-lit Sign

TDL-U6 LED Bar Sample Demo

White and Pink Light Color LED Acrylic Sign

TDL-U6 LED Bar Sample Demo

TDL-UU smart LED bar includes a U channel, LED strip, USB cable, manual, and remote control. It can be remotely controlled or APP controlled via Bluetooth. The LED bar length can be custom-made from 15 to 55cm, slot width can be 5mm or 6.35mm. Besides, this smart LED bar has music light modes, millions of light colors, and many kinds of light modes available.

3. LED Standoff Kit

TDL-LS4 and TDL-LS2 LED standoff kits are specially designed for acrylic plates and mounted on the wall. With a mini built-in LED board, it lights up the whole acrylic sign.

4. LED Sign Clamp for Acrylic Sign

Wall mounted LED acrylic sign clamp TDL-LC mount the acrylic signs on the wall. With a built-in LED strip at the bottom slot of the clamp, LED clamp lights up the acrylic plate. The sign clamp length can be 8cm, 12cm, 18cm, 28cm and 38cm.

5. Mini LED Bar with Suction Cup – LED Sign Base

TDL-U15 mini LED bar includes a U channel, LED strip, and a USB cable. With transparent suction cups, you can mount the acrylic sign on the shop glass and car front windshield.

6. Mini Solar Panel LED Base with Spiker

Mini solar panel LED base has fading RGB light mode by default. The slot is 5mm (it fits 5mm thick acrylic plates). It lights up automatically when it is dark and turns off when it is bright enough. Solar LED base starts to charge where there is sunshine. The estimated unit EXW price is 3~3.5USD for each kit (without acrylic plate). Sample/trail order is welcome.